Best Wet Tile Saw Under $300

Wet tiles saw has become a must-have tool for everyone in the house. Why? Well, every one of us needs to redo the backsplashes of our kitchen and bathroom or even any room floor. Nowadays, it is used widely in watery areas for heavy works.

So, having a wet tile saw has become a highly essential item. And so, making thorough research to find the best wet tile saw has also become essential.

Therefore, we have reviewed the perfect wet tile saw to make sure that you can select the machine that will do the work nicely without overspending money.

Best Wet Tile Saw 2021 : Reviews

1. PORTER-CABLE PCE980 Wet Tile Saw

PORTER-CABLE Wet Tile Saw (PCE980)

Please Check Price

Porter-Cable PCE980 is the best among all the budget wet tile saws. One of the best features of this 7-inch saw is the inbuilt onboard miter square in the 1 HORSEPOWER MOTOR that helps in the lineup of each cut. That does a great job of upgrading accuracy and repeated cuts.

Another incredible fact about this wet tile cutter is the awesome WATER RESERVOIR SYSTEM. Unlike most other wet saws this one is least messy thanks to the splash guard system that stops splashing almost fully. So, no more wasting of hours after hours mopping up wet puddles.

A short clean-up with a single towel is sufficient to do the cleaning. Therefore, cleaning becomes quick and easy. The PCE980 is super PORTABLE. Being FOLDABLE it takes little space to store. And a single person will have no difficulty carrying it and move from place to place. It also comes along with a roll cage with a handle that makes CARRYING IT SO EASY.

Moreover, the stainless steel deck gives this wet saw very STURDY and LONG LASTING qualities that can absorb normal wear and tear without any problem. Furthermore, the tile saw can cut tiles very easily and that includes even the thick ones pretty accurately.

Although this Porter Cable tile saw does require a bit of adjustment to make the straight cut but thanks to its slotted inside rail, you can adjust it without much difficulty. No wonder why it is considered as one of the best wet tile saw under $300.

Pros:

  • Rear Fence (Adjustable)
  • Cast Metal Tray (Sliding)
  • Drain Plug
  • SPLASH GUARD (High Quality)

Cons:

  • Small Water Reservoir

2. SKIL 3550-02 7-Inch Wet Tile Saw

SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System

Please Check Price

This skill 3550-02 7 inches wet tile saw has a distinct hydro lock system that minimizes the water splashing system. This is a time-saving device that cuts the tiles and sets them in places where you wish, such as the kitchen and washroom.

This 120 volts corded saw machine is powered by electricity which has also special characteristics like DIAMOND RIMMED which makes sure that cuts are made evenly and efficiently.

This tile cutter has an aluminum-made table top which is RUST AND CORROSION PROOF. Besides, this tabletop has sliding side extensions that cover up to 18×18 inch tiles.

Other important facts include the weight of 24 pounds, bevel cut for 0, 22.5, and 45 Degrees, rip capacity 24 inches, and load speed 3600 RPM.No wonder why it is considered as one of the best 7-inch wet tiles saw under $300.

Pros:

  • Side extensions (sliding).
  • Minimum water splashing.
  • Cut glasses too.
  • Straight, bevel, and miter cut doable.
  • Assemble effortlessly.
  • Water Containment System

Cons:

  • Table prone to move away slowly during use.
  • Adjusting the fence guide is complicated.

3. SKIL 3540-02 7-Inch Wet Tile Saw

SKIL 3540-02 7-Inch Wet Tile Saw , Red

Please Check Price

SKIL 3540 is the younger brother of SKIL 3550 Even though they have a lot of things in common yet there are few great differences too between them. Firstly, this one is a bit messy as there is nothing to keep water on the table. So, clean-up gets difficult. Therefore, this saw is ok if you use it outdoor.

Moreover, this tile wet saw can cut tiles up to 12 X 12 SIZE which is good enough for most works that are not commercial contractor type works such as weekend works at home. Its stainless steel tabletop remains CORROSION PROOF even after going through multiple work sessions.

Furthermore, the miter gauge in the adjustable rip fence will let you make highly precise and straight miter cuts. And the COOKING RESERVOIR of this blade does a great job of preventing overheating by the continuous supply of water and thus ensure SAFETY during work. Continuous water supply also minimizes the debris and dust.

However, there are few drawbacks too. For instance, there is no inbuilt blade guard or any provision to attach a blade guard. So, it sprayed a bit while in use which is annoying if not a big problem.

Pros:

  • Very Affordable
  • Easy to Set Up
  • Precise Cuts

Cons:

  • Make Great Mess
  • Written Directions Difficult to understand

4. Leegol Electric 7-Inch Wet Tile Saw

Leegol Electric 7-Inch Bench Wet Tile Saw - Portable Wet Cutting Porcelain Tile Cutter Table Saw...

Please Check Price

Leegol Electric 7” Wet Tiles Saw is a great tool for home use having great potential for success. It has few great features such as being LIGHTWEIGHT, EASY TO USE and EASY SET UP as well as portable. However, its operation makes the workplace dirty and slippery and thus dangerous.

This wet tile saw has the ability to BEVEL CUT up to 45 DEGREE. It has also an ADJUSTABLE RIP FENCE as well as a MITER GAUGE. And its BLADE SPEED IS 3550 RPM that let it do a great job in most projects. However, it doesn’t have torque which is very common in high price saws. B

esides, water reservoir and blade designs don’t serve the purpose well as they create a great mess during their use.

Pros:

  • Able to do miter, bevel, and rib cuts
  • Lightweight
  • Portable

Cons:

  • Very messy
  • Unstable Base
  • A Bit Unsafe

5. DEWALT Wet Tile Saw with Stand

DEWALT Wet Tile Saw with Stand, 10-Inch (D24000S)

Please Check Price

DEWALT D24000 is one of the best-wet saw for tile that renders the best services to overwhelm a great majority of users. Thanks to its blade spin of 4200 RAMPS powered by a 1.5 HORSEPOWER motor it can deal successfully with any challenges that you can throw at it.

Another stunning feature of this awesome machine is its cutting capacity of 3 1/8 INCH DEPT, 26 INCH RIPS, and 18 INCH STRAIGHT and diagonal cuts. Blessed with convenient design and 10 INCH BLADE, this super-efficient DEWALT D24000 machine is fully capable of making BEVEL, MITER, and PLUNGE cuts.

Therefore, not for nothing have we chosen this machine as the best commercial wet tile saw under $300 in our tile saw reviews.No doubt, it is considered the best tile saw contractor for its super powerful motor and great cutting capacity both of which are higher than most other similar saws within under $300 price.

Pros:

  • Can Make Miter and Bevel Cuts
  • Can Make plunge Cuts
  • Dual Adjustable Water Nozzle

Cons:

  • Expensive
  • Weighty

6. WEN 71745 4.1A 4.5-Inch Portable Wet Tile Saw

WEN 71745 4.1A 4.5-Inch Portable Wet Tile Saw with Fence and Miter Gauge

Please Check Price

Wen 71707 6.5 A 7 inch is a MATCHLESS DIY wet tiles saw that can help you easily take care of ceramic tiles, stone tiles, and porcelain tiles.

The powerful 6.5 AMPERE powers the rotating motor to rotate the DIAMOND DISK BLADE (7 inches) up to 3450 TIMES PER MINUTE. This makes it easy to work out even the toughest thing such as tiles as thick as 1.2 inches or BEVEL the table 45 DEGREES to make angled cuts in the tiles up to 0.8 INCH THICK.

Keeping the internal water reservoir always filled with water to keep everything thing COOL during work time to prevent breaking and cracking of tiles because of excessive heat.

And the ADJUSTABLE- FENCE plus the SLIDING MITER GAUGE ensures precise cuttings that match exactly according to the dimension and peculiarities of your flooring. This tile saw comes with TWO YEARS WARRANTY and is backed by excellent customer care service.

Moreover, the onboard cord storing system plus the carrying handle along with its lightweight design makes it highly portable and easily storage-able.

Pros:

  • Inexpensive
  • Easy to clean, use, and store
  • Lightweight
  • Compact
  • Versatile

Cons:

  • The fence is poorly designed according to few reviews
  • Don’t Have Enough Features according to few customers reports

7. QEP 22900Q Power 1 HP Pro Tile Wet Saw

QEP 22900Q Power 1 HP Pro Tile Wet Saw, 7-Inch

Please Check Price

QEP 22900Q is a typical DIY 7 inch home use wet tiles saw that can provide professional type services. But it’s the price is a bit higher than the budget. Although, it can push the tile through the blade path and cut it yet sending large tiles using it will be difficult that may lead to poor cuts.

It’s a table that also tilts for the MITER CUTS. Besides, it’s cutting guide has an ANGLE JIG feature that is really great for subway tiles and HERRINGBONE PATTERN.

Additionally, this has also a fixed positioned Guard as well as a MOVEABLE BLADE. This one of the best wet tile saw can make oblique cuts of ANGLES 15, 30, and 45 DEGREES. And its 1 HP motor can generate up to 3600 RMP. So, this machine is powerful enough to cut ceramic, porcelain, slate, marble, and stone.

It is featured on an oversized DIE-CAST ALUMINUM TABLE top for DIAGONAL CUTS of any type. There will be a lot of debris on the table of the saw that can create problems while moving the guard by jamming up under the guard. The guards are made of plastic and so can very easily flex and thus become difficult to adjust.

Moreover, the guard has a simple adjustment tool. Slide the guard after lifting the handle and lock it back after reaching the right dimension. To get the best service make sure your tiles saw deck is as clean and debris-free as possible.

Pros:

  • Easy to use
  • Easy to store
  • Internal Deflection MINIMIZES WATER CONSUMPTION
  • NON-SLIP PAD (Higher Stability)

Cons:

  • Not easy to use due to slideable angle guides
  • Difficult to make diagonal cuts

Factors to Consider for Buying the Best Wet Tile Saw under $300

ACCURACY: Accuracy is the thing that makes significant cuts. All the models in our list can easily accomplish MITER CUTS, REPEATABLE RIPS, and LINING UP plus perfectly FLAT MACHINE METAL CUTTING SURFACES thanks to the integrated system.

BLADE SPEED: This gives the edges of your tiles sharp and clean look. A 3000 RPM will do an excellent job, while 4000 RPM or up will deliver OUTSTANDING performance.

CLEANLINESS: It is essential for safety reasons. And you can do this through some smart design choices. Saws having LARGE DROP TRAYS, SPLASH GUARDS, and CONNECTED WATER SOURCES are great for continuous debris clearing.

PORTABILITY: Having a portable wet tile saw can save you from the great trouble of making numerous trips to and from your workplace. So, let’s not ignore the portability issue.

Final Thoughts

Overall PORTER-CABLE PCE980 WET TILES SAW is the clear winner. It can deal easily with all your tiles and stone cutting jobs and it is an easy-to-use, simple tool that is also compact and accurate. And the price is also under $300 which is great too.

But, if your budget is tight then SKIL 3540-02 wet tile saw is the best alternative pick to our best choice. You can buy it at almost half the price of many other wet tiles saws and yet can deliver fantastic performance in most of your DIY projects.

Having said that, all the other wet tiles saws in our list can also are also great items that offer fantastic performance at a very reasonable price of fewer than 300 dollars. They can also become choices of best-wet tile saws under different requirements and circumstances for you.

We sincerely hope that this guide can guide you to find your best-wet tile saw under $300 that you will find a great tool to use.

Last but not the least, we are very eager to know about your experiences with budget wet tiles saws under $300. They are precious to us as they are like guiding light that shows us the path to improving our service for you. So, why not share your experiences with us by writing in the comments box below.

GOOD LUCK IN YOUR SEARCH!!!

Leave a Comment